Mobile Phones Damage Solution

The damage of mobile phones can caused by many things. Following are some causes of damage to mobile phones in general and the improvement.

Fell into the water.
Mobile phones are electronics equipment that is very sensitive. When exposed to water, the component of mobile phone will be short because electric current can flow through the water. If not treated quickly, the damage become more severe.
To repair, wash machine using mobile ultrasonic cleaner. When the mobile phone is still broken, heat the components using the blower.

Drop
Dropped mobile phone can cause the tin cracked. When this happens, the phone will not work correctly because each component in the mobile phone is integral. To fix the problem, heat the components using a blower at a temperature of 350 degrees centigrade.

Corrosion
Corrosion can be caused by the use of too long or too often kept in pants pocket. Humid air from the heat will go into mobile phones. This will cause corrosion. Addition, corrosion can also be caused by the air around him.
To improve, wash the machine using the ultrasonic cleaning equipment. check the path of PCB, when dropouts, re-connect.

The Error
Mobile phones can work correctly when the programs in the mobile phone does not interfere. If the program error can cause the mobile phone does not work correctly. To improve, restore the factory settings. If still broken, re-flash your mobile phones.

Good luck.